Consecuencias de la artritis reumatoide en la articulación temporomandibular y su manejo odontológico / Consequences of rheumatoid arthritis in the temporomandibular joint and its dental management

Introducción: la artritis reumatoide es parte del grupo de las enfermedades autoinmunes con incidencia considerable sobre la población. Se caracteriza por la afección de las articulaciones del cuerpo que la padece; en mayor frecuencia se encuentra afectada la articulación temporomandibular por el complejo articular que ésta presenta; entre los signos y síntomas que comúnmente podemos encontrar en pacientes con este tipo de enfermedad son los chasquidos o ruidos articulares, dolor orofacial, pérdida o imposibilidad del movimiento de la mandíbula y cambios anatómicos localizados en el área de la articulación temporomandibular. Objetivo: describir las consecuencias que desencadena la artritis reumatoide sobre la articulación temporomandibular y cómo es para el odontólogo el manejo de estos pacientes en consulta, evaluar los tratamientos para cada caso sobre un correcto diagnóstico. Material y métodos: se realizó una revisión bibliográfica de artículos recientes sobre el tema, utilizando buscadores como SciELO, Elsevier y PubMed, siendo 30 las fuentes seleccionadas con idiomas en inglés y español. Resultados: esta enfermedad autoinmune se caracteriza por afectar múltiples articulaciones del cuerpo humano simétrica y bilateralmente incluyendo la articulación temporomandibular (ATM), lo cual conlleva al riesgo de desarrollar trastornos temporomandibulares (TTM). Es importante conocer los métodos para realizar un correcto diagnóstico oportuno de la ATM del paciente con artritis reumatoide (AR) con la finalidad de ofrecer un tratamiento conservador. Conclusión: los trastornos temporomandibulares desencadenantes de la artritis reumatoide son afecciones que se deben considerar para el buen manejo del paciente con este padecimiento, comprender y respaldar un diagnóstico clínico es de vital importancia para dar al paciente un tratamiento adecuado dependiendo el grado de complejidad en la que cada individuo se encuentra; conocer el manejo adecuado y encaminar al paciente a una mejor calidad de vida es clave en la consulta odontológica del día a día (AU)

Introduction: rheumatoid arthritis is part of the group of autoimmune diseases with considerable incidence in the population. It is characterized by the affection of the joints of the body that suffers from it; most frequently the temporomandibular joint is affected due to the articular complex that it presents; among the signs and symptoms that we can commonly find in patients with this type of disease are joint clicks or noises, orofacial pain, loss or impossibility of jaw movement and anatomical changes located in the temporomandibular joint area. Objective: to describe the consequences that rheumatoid arthritis triggers on the temporomandibular joint and how it is for the dentist to manage these patients in consultation, to evaluate the treatments for each case on a correct diagnosis. Material and methods: a bibliographic review of recent articles on the subject was carried out, using search engines such as SciELO, Elsevier and PubMed, with 30 sources selected in English and Spanish. Results: this autoimmune disease is characterized by affecting multiple joints of the human body symmetrical and bilaterally including the TMJ which leads to the risk of developing TMD. It is important to know the methods to make a correct diagnosis of the TMJ of the patient with RA in order to offer a conservative treatment. Conclusions: the temporomandibular disorders that trigger rheumatoid arthritis are conditions that should be considered for the proper management of the patient with this condition, understanding and supporting a clinical diagnosis is of vital importance to give the patient an adequate treatment depending on the degree of complexity in which each individual is; knowing the proper management and directing the patient to a better quality of life is key in the day-to-day dental practice (AU)

Manejo das disfunções temporomandibulares. Parte I: tratamento conservador / Management of temporomandibular joint disorders. Part I: conservative treatment

Objetivo: Apresentar as modalidades de tratamentos conservadoras e minimamente invasivas mais usadas disponíveis no arsenal terapêutico das desordens temporomandibulares (DTM). Revisão da literatura: Os objetivos do tratamento invariavelmente incluem redução da dor, diminuição das atividades parafuncionais e restauração da função. Dentre as alternativas conservadoras e minimamente invasivas, podemos citar os dispositivos interoclusais, exercícios terapêuticos, eletrofototermoterapia, agulhamento seco e infiltração de anestésicos locais em pontos gatilho, injeção de sangue autógeno para controle da luxação mandibular, terapia cognitivo comportamental, toxina botulínica, viscossuplementação, controle farmacológico da dor aguda e crônica. As DTMs afetam uma proporção significativa da população. Somente após o fracasso das opções não invasivas é que devem ser iniciados tratamentos mais invasivos e irreversíveis. No entanto, algumas condições, como a anquilose e neoplasias, por exemplo, são essencialmente tratadas cirurgicamente e tentativas de tratamentos conservadores podem trazer piora na qualidade de vida ou risco de morte. Considerações finais: Uma abordagem de equipe multidisciplinar para o manejo é essencial no cuidado fundamental de todos os pacientes com DTM, para que o tratamento possa ser especificamente adaptado às necessidades individuais do paciente.

Aim: To present the most widely used conservative and minimally invasive treatment modalities available in the therapeutic arsenal for temporomandibular disorders (TMD). Literature review: Treatment goals invariably include pain reduction, reduction of parafunctional activities and restoration of function. Among the conservative and minimally invasive alternatives, we can mention interocclusal devices, therapeutic exercises, electrophototherapy, dry needling and infiltration of local anesthetics in trigger points, autogenous blood injection to control mandibular dislocation, cognitive behavioral therapy, botulinum toxin, viscosupplementation, pharmacological control of acute and chronic pain. TMD affects a considerable proportion of the population. Only after non-invasive options have failed should more invasive and irreversible treatments be initiated. However, some conditions, such as ankylosis and neoplasms, for example, are treated surgically and attempts at conservative treatments can lead to worsening quality of life or risk of death. Conclusions: A multidisciplinary team approach to management is essential in the fundamental care of all TMD patients, so that treatment can be specifically tailored to the patient's individual needs.

Reabilitação estética com facetas e coroas cerâmicas em dissilicato de lítio: relato de caso / Aesthetic rehabilitation with ceramic facets and crowns in lithium disilicate: case report

Introdução: A procura pela estética do sorriso é crescente na Odontologia, pois, muitas vezes um sorriso alinhado e periodonto saudável não são o bastante. A cerâmica odontológica apresenta-se como uma ótima possibilidade restauradora, visto o avanço das técnicas de adesão entre o substrato dentário e as cerâmicas, torna-se mais previsível o resultado com este tipo de reabilitação. Objetivo: O presente artigo tem como objetivo descrever um caso clínico com envolvimento de diversos níveis de desgaste dentário para reabilitação estética com cerâmica de dissilicato de lítio. Relato de caso: Paciente 36 anos, gênero feminino, apresentava insatisfação com seu sorriso devido a forma e a alteração de cor dos seus dentes superiores anteriores e pré-molares. O plano de tratamento consistiu em realizar a troca da coroa metalocerâmica por coroa total cerâmica da unidade 14, coroa total cerâmica nas unidades 11, 21 e 22, facetas cerâmicas nas unidades 15, 13, 12, 23, 24 e 25, osteotomia e gengivoplastia das regiões de 2º prémolar superior esquerdo ao 2º pré-molar superior direito, clareamento dental caseiro da arcada inferior e placa oclusal superior de proteção. O material de escolha para a resolução do caso clínico foi a cerâmica vítrea reforçada à base de dissilicato de lítio, pois, possui um índice de refração de luz semelhante à estrutura dentária, sem interferência significativa da translucidez, além de ser passível de cimentação adesiva por se tratar de uma cerâmica ácido sensível e o tamanho do cristal e a sua disposição favorecem o aumento das propriedades mecânicas da restauração. Conclusão: O plano de tratamento realizado permitiu o restabelecimento da função e estética, com reprodução das características dos dentes naturais e promoção da jovialidade e da harmonia no sorriso(AU)

Introduction:The demand for smile aesthetics is growing in Dentistry, because, often a smile aligned and healthy periodontium are not enough. Dental ceramics, presented as an excellent restorative possibility, since the advancement of adhesion techniques between the dental substrate and the ceramics, becomes more predictable the result with this type of rehabilitation. Objective: This article aims to describe a clinical case involving several levels of dental wear for aesthetic rehabilitation with ceramics. Case Report: A 36-year-old female patient presented dissatisfaction with her smile due to the shape and color alteration of her anterior and premolar upper teeth. The treatment plan consisted of exchanging the metal-ceramic crown for the total ceramic crown of unit 14, total ceramic crown in units 11, 21 and 22, ceramic veneers in units 15, 13, 12, 23, 24 and 25, osteotomy and gingivoplasty of the regions from 2nd left upper premolar to 2nd right upper premolar, home tooth whitening of the lower arch and upper occlusal plate of protection. The material of choice for the resolution of the clinical case was the glass ceramic reinforced on the basis of lithium disilicate because it has a refractive index of light similar to the dental structure, without significant interference of translucency, besides being liable to adhesive cementation because it is a sensitive acid ceramic and the size of the crystal and its disposition favor the increase of the mechanical properties of the restoration. Conclusion: The treatment plan performed allowed the restoration of function and aesthetics, with reproduction of the characteristics of natural teeth and promotion of joviality and harmony in the smile(AU)

Effect of low-level LASER therapy versus CAD/CAM Michigan splint on patients with Temporomandibular Muscle Disorders: a randomized clinical trial / Efeito da terapia LASER de baixa potência versus placa de Michigan CAD/CAM em pacientes com Distúrbios Temporomandibulares musculares: um ensaio clínico randomizado

Objective: This study aimed to evaluate the efficacy and sustainability of using low level LASER therapy and CAD/CAM Michigan splint on improving the range of mandibular movements, muscle activity and reducing the pain. Material and Methods: 56 female patients were randomly divided into two groups. Group A: Patients received applications of low-level LASER therapy using semiconductor InGaAsp diode LASER type 940 nm with continuous mode of operation, applied for 180 sec per session for 12 sessions. Group B: Patients received Michigan splint of 2 mm thickness constructed on their upper teeth, the splint was 3D digitally printed. Electromyography was used to evaluate muscle activity, visual analogue scale was used to evaluate the pain intensity, ARCUS digma facebow was used to evaluate range of mandibular movements, and maximum mouth opening was taken using a millimeter ruler. They were measured before the beginning of the treatment, and at three and six month follow-up periods. Results: The results revealed that both low-level LASER therapy and Michigan splint reduce the myofascial pain, improved the range of the mandibular movements, and the muscles activity, but the effect of the low-level LASER therapy was more profound and sustainable. After 6 months from the beginning of the treatment, changes in masseter muscle activity (P= 0.001; effect size= 1.757), pain intensity (P= 0.003; effect size= 3), and range of mandibular movement (P= 0.001, effect size= 1.729) differed significantly between the two groups. Conclusions: Low-level LASER therapy had a better and more sustainable effect on reducing the pain intensity and improving the muscle activity as well as the mandibular movement when compared to Michigan splint (AU)

Objetivo: Este estudo teve como objetivo avaliar a eficácia e a durabilidade do uso da terapia LASER de baixa potência e da placa de Michigan CAD/CAM na melhora da amplitude dos movimentos mandibulares, atividade muscular e redução da dor. Material e Métodos: 56 pacientes do sexo feminino foram divididos aleatoriamente em dois grupos. Grupo A: os pacientes receberam aplicações de terapia LASER de baixa potência utilizando diodo semicondutor InGaAsp LASER tipo 940 nm em modo contínuo de operação, aplicado por 180 segundos por sessão durante 12 sessões. Grupo B: os pacientes receberam a placa de Michigan com uma espessura de 2 mm confeccionada sobre a arcada superior, a placa foi impressa digitalmente em 3D. A eletromiografia foi utilizada para avaliar a atividade muscular, a escala visual analógica foi utilizada para avaliar a intensidade da dor, o arco facial ARCUS digma foi utilizado para determinar a amplitude dos movimentos mandibulares e a abertura máxima da boca foi medida com uma régua milimétrica. Todas as medidas foram realizadas antes do início do tratamento e nos períodos de acompanhamento de três e seis meses. Resultados: Os resultados revelaram que tanto a terapia LASER de baixa potência como a placa de Michigan reduziram a dor miofascial, aumentaram a amplitude dos movimentos mandibulares e melhoraram a atividade muscular, mas o efeito da terapia LASER de baixa potência foi mais profundo e duradouro. Após 6 meses do início do tratamento, as alterações na atividade do músculo masseter (P= 0. 001; tamanho do efeito= 1,757), intensidade da dor (P= 0,003; tamanho do efeito= 3), e amplitude de movimento mandibular (P= 0,001, tamanho do efeito= 1,729) diferiram significativamente entre os dois grupos. Conclusão: A terapia com LASER de baixa potência teve um efeito melhor e mais duradouro na redução da intensidade da dor e na melhora da atividade muscular, bem como do movimento mandibular, quando comparada à placa de Michigan(AU)

Systemic scleroderma: imaging findings of diagnosis and clinical management of temporomandibular joint disorders / Esclerodermia sistêmica: diagnóstico por achados imaginológicos e manejo clínico das disfunções temporomandibulares

Scleroderma, an autoimmune disease, directly affects the production of collagen in the connective tissue. In its systemic form, the disease causes oral manifestations such as: limited mouth opening, xerostomia, periodontal disease, thickening of the periodontal ligament and bone resorption of the mandible. This case report aims to draw attention to the difficulties encountered in providing dental care to patients with scleroderma and also to highlight the imaging findings, with emphasis on the temporomandibular joints, which are of interest to dentists about the disease. In the present case, the patient presented bilateral condylar erosion, in addition to disc displacement without reduction. Due to the systemic condition of the patient, it was decided to make an individualized occlusal splint. The limitation of mouth opening is a limiting factor for the manufacture of prostheses and plates, which is why partial prostheses are indicated and are easily removed by the patient. The decisions taken have a great impact on the health and quality of life of patients in these conditions, so there is a need for multidisciplinary involvement in order to arrive at the best treatment plan. After five years of using the stabilizing plate overnight, the patient reports greater comfort and muscle relaxation upon waking up (AU)

Esclerodermia, uma doença autoimune, afeta diretamente a produção de colágeno do tecido conjuntivo. Na forma sistêmica, a doença causa manifestações bucais, como: limitação de abertura bucal, xerostomia, doença periodontal, espessamento do ligamento periodontal e reabsorção da mandíbula. Este relato de caso tem por objetivo chamar atenção para as dificuldades encontradas ao promover atendimento odontológico para pacientes com esclerodermia e também destacar os achados imaginológicos, com ênfase na articulação temporomandibular, que são da doença e de interessa ao cirurgião-dentista. No presente caso, a paciente apresentava erosão condilar bilateral, com deslocamento de disco sem redução. Devido à condição sistêmica da paciente, foi decidido confeccionar uma placa oclusal individualizada. A limitação de abertura bucal é um fator limitante para confecção de próteses e placas, por isso próteses parciais são indicadas, além de serem de fácil remoção pelo paciente. As decisões tomadas tem grande impacto na saúde e qualidade de vida de pacientes nessas condições, deste modo é necessário uma equipe multidisciplinar envolvidas para chegar no melhor plano de tratamento. Após cinco anos fazendo uso da placa estabilizadora durante a noite, a paciente relata maior conforto e relaxamento muscular ao acordar (AU)

Resistência flexural de uma resina para impressão 3D comparada a resinas acrílicas convencionais empregadas para confecção de placas estabilizadoras de mordida / Flexural resistance of 3D printing resin compared to conventional acrylic resins employed to build occlusal bite splints

Introduction: with the technological advance in dentistry, light-polymerized three-dimensional (3D) printing resins had become an alternative for the manufacture of occlusal splint splints. Objective: the present study aimed to analyze the flexural strength of a resin for 3D printing compared to conventional acrylic resins (chemically activated and thermally activated), under the influence of thermocycling. Material and method: 60 specimens were made, which were distributed in six experimental groups (n = 10), according to the resin employed (chemically activated acrylic resin, thermally activated acrylic resin and 3D printing resin) and the treatment received (control and thermocycling). The specimens were submitted to flexural strength by the three-point flexural test. Result: data analysis showed that the material factor (<0.0001) and the thermocycling factor (p = 0.0096) influenced flexural strength, however, the interaction between the two factors did not (p = 0.9728). Conclusion: it was concluded that 3D printing resins presented the lowest flexural resistance to acrylic resins, especially when submitted to thermocycling.

Introdução: com o avanço tecnológico dentro da odontologia, as resinas fotopolimerizáveis para impressão tridimensional (3D) se tornaram uma alternativa para a fabricação de dispositivos interoclusais. Objetivo: o presente trabalho teve como objetivo analisar a resistência flexural de uma resina para impressão tridimensional comparada com resinas acrílicas convencionais (quimicamente ativada e termicamente ativada), sob a influência da termociclagem. Material e método: foram confeccionados 60 corpos de prova, que foram distribuídos aleatoriamente em seis grupos experimentais (n=10), de acordo com a resina utilizada (resina acrílica ativada quimicamente, resina acrílica ativada termicamente e resina para impressão 3D) e com o tratamento recebido (controle e termociclagem). Os corpos de prova foram submetidos ao ensaio de flexão de três pontos para determinação da resistência flexural. Resultado: a análise dos dados demonstrou que o fator material (<0.0001) e o fator termociclagem (p=0.0096) influenciaram a resistência flexural, entretanto, a interação entre os dois fatores não (p=0.9728). Conclusão: deste modo podemos concluir que a resina para impressão 3D apresentou desempenho inferior às resinas acrílicas, especialmente quando submetida a termociclagem.

Effect of laboratory and chairside polishing methods on the surface topography of occlusal splint materials manufactured using conventional, subtractive and additive digital technologies / Efeito de métodos de polimento em laboratório e em consultório na topografia de superfície de materiais de splint oclusal fabricados usando tecnologias digitais convencionais, subtrativas e aditivas

Objetivo: Este estudo avaliou as propriedades de polimento dos materiais de splint oclusal obtidos usando métodos de fabricação subtrativos e aditivos com os procedimentos de polimento laboratorial (LP) e polimento em consultório (CP). Material e Métodos: As amostras (N=180, n=60 para cada grupo) foram fabricadas usando um dos seguintes métodos: método de fabricação subtrativo (SMM) (M-PM Disc, Merz Dental GmbH), método de fabricação aditivo (AMM) (Freeprint Splint 2.0, DETAX GmbH & Co. KG) e o método de fabricação convencional (CMM) (Promolux HC, Merz Dental GmbH). Seguindo os procedimentos de LP e CP, a rugosidade da superfície dos espécimes foi medida usando um perfilômetro de superfície digital. Um espécime representativo foi selecionado de cada grupo, e uma imagem de microscópio eletrônico de varredura (SEM) foi obtida. Resultados: Tanto o método de fabricação quanto os procedimentos de polimento afetaram significativamente os resultados (P<0,01). Os termos de interação também foram significativos (P<0,001). Conclusão: Com ambos os métodos de polimento, a rugosidade superficial do grupo AMM foi a maior e a do grupo CMM a menor. Embora o procedimento CP tenha sido mais eficaz do que LP com ambos os métodos, a rugosidade da superfície ficou abaixo do limite de 0,2 µm após ambos os procedimentos de polimento testados (AU)

Objective: This study evaluated the polishing properties of the occlusal splint materials obtained using subtractive and additive manufacturing methods with the laboratory-type polishing (LP) and chairside-type polishing (CP) procedures. Material and Methods: Specimens (N=180, n=60 each group) were manufactured using one of the following methods: subtractive manufacturing method (SMM) (M-PM Disc, Merz Dental GmbH), additive manufacturing method (AMM) (Freeprint Splint 2.0, DETAX GmbH & Co. KG), and the conventional manufacturing method (CMM) (Promolux HC, Merz Dental GmbH). Following LP and CP procedures, surface roughness of the specimens was measured using a digital surface profilometer. One representative specimen was selected from each group, and a scanning electron microscope (SEM) image was made. Results: Both the manufacturing method and the polishing procedures significantly affected the results (P<0.01). Interaction terms were also significant (P<0.001). Conclusion: With both polishing methods, surface roughness of the AMM group was the highest and the CMM group the least. Although the CP procedure was more effective than LP with both methods, surface roughness was below the 0.2 µm threshold after both polishing procedures tested. (AU)

Modificación de la actividad metabólica por medio de un dispositivo intraoral en pacientes con hiperplasia condilar confirmada por SPECT / Metabolic activity modification by means of an intraoral device in patients with condylar hyperplasia confirmed by SPECT

Objetivo: Evaluar los efectos de la aplicación de un dispositivo intraoral de uso permanente en el comportamien- to de los cóndilos con hiperplasia condilar (HC) confirmada por tomografía computarizada de emisión por fotón único (SPECT), estableciendo una comparación con un grupo de pacientes con HC que no utilizó el dispositivo. Materiales y métodos: 30 pacientes con una edad promedio de 21,7 años (+/-5,56) con HC confirmada con SPECT fueron asignados al azar a dos grupos: a los del grupo I (n=18) se les colocó un dispositivo intraoral de uso perma- nente para modificar la posición de la mandíbula, mientras que a los del grupo II (n=12) no se les colocó ningún dispo- sitivo. Se realizaron evaluaciones de dolor, del desvío de la línea media, de la apertura máxima y del disconfort al inicio del estudio y a los 2, 4, 6, 10, 12 y 14 meses. A los 19 meses promedio, la actividad osteoblástica (AO) fue reevaluada me- diante SPECT. Resultados: En el grupo I, la AO en los cortes coro- nales y transversales cesó o disminuyó (p<0,001) respecto a la condición inicial, mientras que en el grupo II la AO au- mentó (p<0,001). Los datos fueron analizados utilizando el test de Wilcoxon de rangos signados. Al ajustar un modelo de ANCOVA robusto utilizando el valor inicial como covariable también se observa que el efecto del grupo fue estadística- mente significativo en ambos cortes (p<0,001). Conclusiones: La aplicación de un dispositivo intrao- ral de uso permanente mejora la evolución de la hiperplasia condilar, lo que lo puede convertir en un tratamiento de uti- lidad para el tiempo que se aguarda para realizar una condi- lectomía alta de cuello de cóndilo, o incluso para evitar este procedimiento (AU)

Objective: To evaluate the effects of the application of an intraoral device for permanent use on the behavior of con- dyles with condylar hyperplasia (CH) confirmed by single photon emission computed tomography (SPECT), establish- ing a comparison with a group of patients with CH that did not use the device. Materials and methods: Thirty patients with an aver- age age of 21.7 years (+/-5.56) with CH confirmed by SPECT were randomly divided into two groups: the ones in group I (n=18) received an intraoral device for permanent use to align the mandible, while those in group II (n=12) did not get any device. Pain, midline shift, maximum opening, and discomfort were evaluated at the beginning of the study and at 2, 4, 6, 10, 12, and 14 months. At an average of 19 months, osteoblastic activity (AO) was reassessed by SPECT. Results: In group I, the AO in the coronal and trans- verse sections ceased or decreased (p<0.001) in comparison to the initial condition, while in group II the AO increased (p<0.001). The data was analyzed by the Wilcoxon signed rank test. Adjusting a robust ANCOVA model using the ini-tial value as a covariate made it possible to observe that the effect of the group was statistically significant in both cuts (p<0.001). Conclusions: The application of an intraoral device for permanent use improves the evolution of condylar hyperpla- sia, which can make it a useful treatment until a high condylectomy of the neck of the condyle is performed, or even to avoid this procedure (AU)

Efectividad del Bionator de California en la disminución del grado de severidad de los trastornos temporomandibulares / Effectiveness of the California Bionator in reducing the degree of severity of temporomandibular disorders

RESUMEN Fundamento: Existen modalidades de tratamiento para los trastornos temporomandibulares, una de ellas es la Ortopedia funcional de los maxilares. Objetivo: Evaluar la efectividad del Bionator de California en la disminución del grado de severidad de los trastornos temporomandibulares. Metodología: Se realizó estudio experimental, abierto, controlado y aleatorizado en el servicio de Prótesis Estomatológica de la Clínica Estomatológica de Fomento en el período de septiembre de 2019 a septiembre de 2021. Se seleccionaron 60 pacientes con trastornos temporomandibulares que cumplieron los criterios de selección, mediante asignación aleatoria se establecieron los grupos: Estudio (tratado con Bionator de California) y control (tratado con férula neuromiorrelajante). Se utilizaron métodos del nivel teórico, empírico y estadístico. La variable de respuesta principal fue: Efectividad del Bionator de California en el grado de severidad del trastorno temporomandibular. Resultados: Al inicio del estudio predominó la severidad moderada de trastornos temporomandibulares en ambos grupos, pero a los 6 meses de tratamiento predominaron los asintomáticos (66.7 %) en el grupo estudio y 36.7 % en el grupo control, con diferencia estadísticamente significativa entre ambos grupos. Conclusiones: El tratamiento con el Bionator de California fue efectivo porque se logró disminuir el grado de severidad de los trastornos temporomandibulares.

ABSTRACT Background: There are treatment modalities for temporomandibular disorders, one of them is functional orthopedics of the jaws. Objective: To evaluate the effectiveness of the California Bionator in reducing the degree of severity of temporomandibular disorders. Methodology: An experimental, open, controlled and randomized study was carried out in the Dental Prosthesis service at Fomento Dental Clinic from September 2019 to September 2021. 60 patients with temporomandibular disorders who met the selection criteria were selected. The groups were established by random assignment: Study (treated with Bionator from California) and control (treated with a neuromyorelaxant splint). Method theoretical, empirical and statistical levels were used. The main response variable was: Effectiveness of the California Bionator in the degree of severity of the temporomandibular disorder. Results: At the beginning of the study moderate severity of temporomandibular disorders prevailed in both groups, but after 6 months of treatment asymptomatic predominated (66.7%) in the study group and 36.7% in the control group, with a statistically significant difference between both groups. Conclusions: The treatment with the California Bionator was effective because the degree of severity of temporomandibular disorders was reduced.

Avaliação eletromiográfica da musculatura mastigatória e da coluna cervical com uso de placa oclusal: relato de caso / Electromyographic evaluation of masticatory and cervical musculature with occlusal splint: case report

Objetivo: Avaliar a atividade elétrica de músculos mastigatórios e cervicais e sua inter-relação na estabilização da cadeia crânio cervico umeral com uso da placa oclusal, por meio da avaliação eletromiográfica. Relato de caso: Paciente sexo feminino, 39 anos, queixando-se de dores na cabeça, faciais e cervicais, com prejuízo em suas atividades diárias. Relatou apertar os dentes durante o dia e a noite e ser uma pessoa muito ansiosa. Pratica exercício físico de 5 a 6 vezes por semana. Foi submetida ao tratamento com placa oclusal estabilizadora. O exame eletromiográfico foi realizado nos músculos masseter e trapézio, bilateralmente. A coleta de dados foi realizada antes da instalação da placa e passados 90 dias de uso. Considerações finais: Após o tempo de tratamento, foi relatado redução do comportamento de apertamento noturno e diurno dos dentes, redução do nódulo muscular antes visível na região supraescapular, eliminação das dores e melhor rendimento muscular durante a prática de atividade física.(AU)

Objective: To evaluate the electrical activity of masticatory and cervical muscles and their relationship in the stabilization of the craniocervicohumeral chain using a occlusal splint, through electromyographic evaluation. Case report: Female patient, 39 years old, complaining of headaches, facial and cervical pain, with impairment in her daily activities. She reported teeth clenching during the day and night, and being a very anxious person. She practices physical exercise 5 to 6 times a week. She underwent treatment with a stabilizing occlusal splint. The electromyographic examination was performed on the masseter and trapezius muscles, bilaterally. Data was collected before occlusal splint installation and after 90 days of use. Final considerations: After the treatment period, it was reported a reduction in the behavior of nocturnal and daytime teeth clenching, reduction of the muscle nodule previously visible in the suprascapular region, elimination of pain and better muscle performance during the practice of physical activities.(AU)

Análisis de las creencias limitantes a través del acompañamiento en Bioneuroemoción(R) de individuos con diagnóstico de bruxismo / Analysis of limiting beliefs through the accompainment in Bioneuroemotion(R) in individuals with a diagnosis of bruxism

El propósito de este trabajo cualtitativo fue aplicar el método de Bioneuroemoción en individuos que, estando en tratamiento por bruxismo, continuaban con dolor y sintomatología asociada. El análisis de las creencias limitantes en común de los individuos, las resonancias familiares y la emoción primaria desencadenada, permitieron obtener desde dónde percibían dichos individuos las situaciones de mayor estrés. Para ello, se consideró un diseño muestral centrado en un grupo de cinco pacientes que concurrían al Servicio de ATM (Articulación Temporomandibular) de un hospital odontológico de la Ciudad de Buenos Aires, donde estaban siendo tratados por bruxismo con placas miorrelajantes (AU)

Effect of using Photobiomodulation, stabilization, and anterior repositioning splints on the pain level of subjects with temporomandibular joint disc displacement with reduction / Efeito do uso da terapia a laser de baixa potência, placas planas e placas reposicionadoras anterior, no nível de dor de indivíduos com deslocamento anterior do disco articular com redução

Objective: was to evaluate the effect of four conservative treatment modalities on the pain level of patients with temporomandibular joint (TMJ) anterior disc displacement with reduction (ADDwR). Material and methods:100 subjects (64 females and 36 males) were selected, divided into four groups, 25 patients of each. Subjects of Group I have been treated with behavioral therapy. Subjects of Group II had been treated with Photobiomodulation therapy (PBMT). Subjects of Group III had been treated by anterior repositioning splint (ARS). Subjects of Group IV had been treated by a stabilization splint. The pain was evaluated by visual analog score (VAS) from 0 to 10. Statistical analysis was done using one-way ANOVA test for comparison between groups. Within each group, a comparison between baseline and after treatment was done using paired t-test (p<0.05). Results: There was a statistical difference between the pain scores of the different groups after treatment (p≤0.05). Also, there were statistical differences between all groups (p≤0.05) except that between group II and group III (p˃0.05). Conclusion: The use of stabilization splint and ARS are effective non-invasive methods for reducing the pain level in the treatment of TMJ ADDwR cases.(AU)

Objetivo: avaliar o efeito de quatro modalidades de tratamento conservador no nível de dor de pacientes com deslocamento anterior do disco articular com redução. Material e Métodos: foram selecionados 100 indivíduos(64 mulheres e 36 homens), divididos em quatro grupos, 25 pacientes cada. Os indivíduos do Grupo I foram tratados com terapia comportamental. Os indivíduos do Grupo II foram tratados com terapia de fotobiomodulação. Os indivíduos do Grupo III foram tratados com placa de reposicionamento anterior. Os indivíduos do Grupo IV foram tratados com uma placa de estabilização. A dor foi avaliada pelo escala visual analógica (EVA) de 0 a 10. A análise estatística foi feita usando o teste ANOVA de uma via para comparação entre os grupos. Dentro de cada grupo, uma comparação entre a linha de base e após o tratamento foi feita usando o teste t pareado (p <0,05). Resultados: Houve diferença estatística entre os escores de dor dos diferentes grupos após o tratamento (p ≤ 0,05). Além disso, houve diferenças estatísticas entre todos os grupos (p ≤0,05), exceto entre o grupo II e o grupo III (p˃0,05). Conclusão: O uso de placa de estabilização e reposicionadora anterior são métodos não invasivos eficazes para reduzir o nível de dor no tratamento de casos de deslocamento anterior de disco articular sem redução.(AU)

O modelo de dor inflamatória induzida pela carragenina como estratégia para avaliar a ação de drogas sobre a dor miofascial / The carrageenan-induced inflammatory pain model as a tool to assess the action of drugs on myofascial pain

A dor miofascial orofacial vem sendo tratada com analgésicos, anti-inflamatórios, relaxantes musculares, fisioterapia, laserterapia e placas oclusais. Contudo, muitas vezes, tais condutas falham em amenizar o quadro doloroso, havendo a necessidade de testar outras estratégias de tratamento. Metodologia: Uma opção para avaliação experimental dessas terapias seria o teste de dor induzido pela carragenina, associado ao teste de avaliação do limiar nociceptivo, originalmente desenvolvido para avaliar a ação de drogas nas patas de roedores. Sendo assim, o presente estudo analisou a nocicepção causada pela carragenina em masseteres de ratos, através do teste de Von Frey, correlacionando-a com alterações teciduais produzidas por esta droga. A carragenina foi injetada no músculo masseter de ratos, enquanto o grupo controle recebeu soro fisiológico. O limiar nociceptivo foi mensurado com um analgesímetro digital antes da administração da carragenina e 5 horas, 1, 3 e 7 dias após o seu uso. Decorridos 8 dias da intervenção, os animais foram eutanasiados, sendo seus masseteres encaminhados para processamento histológico e coloração H&E. Resultados: Observou-se uma diminuição do limiar da resposta nociceptiva em todos os períodos no grupo com carragenina, quando comparado com o grupo controle, havendo diferença estatisticamente significante nas 5 horas. A análise histológica do grupo experimental mostrou a presença de espaços perimisial e endomisial alargados e preenchidos por uma matriz com alguns linfócitos, muitos macrófagos e raros mastócitos. Conclusão: Os resultados indicaram que a associação de uma droga inflamatória com o método Von Frey pode ser uma opção para o estudo do efeito de terapias de dor miofascial.

Myofascial orofacial pain has been treated with analgesics, anti-inflammatories, muscle relaxants, physiotherapy, laser therapy and occlusal plaques. However, many times, such behaviors fail to alleviate the painful condition, with the need to test other treatment strategies. Methodology: An option for experimental evaluation of these therapies would be the pain test induced by carrageenan associated with the nociceptive threshold assessment test, originally developed to assess the action of drugs on the rodents' feet. Thus, the present study analyzed the nociception caused by carrageenan in rat masseter using the Von Frey test, correlating it with tissue changes produced by this drug. Carrageenan was injected into the masseter muscle of rats, while the control group received saline. The nociceptive threshold was measured with a digital analgesometer before administration of carrageenan and 5 hours, 1, 3 and 7 days after its use. After 8 days of the intervention, the animals were euthanized, and their masseters were sent for histological processing and H&E staining. Results: There was a decrease in the nociceptive response threshold in all periods in the group treated with carrageenan when compared to the control group, with a statistically significant difference at 5 hours. Histological analysis of the experimental group showed the presence of enlarged perimisial and endomisial spaces, filled by a matrix with some lymphocytes, many macrophages and rare mast cells. Conclusion: Results indicated that the association of an inflammatory drug with the Von Frey method may be an option for studying the effect of therapies on myofascial pain.

Microtornillos como método de control vertical en desprogramación muscular / Vertical control with miniscrews in muscular deprogramming treatment

Una de las consecuencias de la desprogramación neuromuscular es la rotación mandibular en sentido horario, evidenciando el punto prematuro de contacto y aumentando la dimensión vertical del paciente. En pacientes clase II con componente vertical, es un problema realizar este tipo de tratamiento, ya que por lo general este efecto de posterorrotación mandibular hace el perfil más convexo, y en algunos casos genera mordida abierta anterior, la cual se debe corregir posteriormente con el tratamiento de ortodoncia, cirugía o prótesis, lo que alarga el tiempo total de tratamiento por la necesidad de control vertical. El presente caso se trata de una mujer de 45 años de edad, dolicofacial, con tendencia a mordida abierta, mordida dual, sobremordida vertical y horizontal disminuidas, motivo de consulta dolor articular, el cual no le permite continuar con sus labores diarias, el tratamiento realizado fue desprogramación neuromuscular con un guarda oclusal inferior con el propósito de aliviar sintomatología articular y control vertical con microtornillos palatinos previo a tratamiento ortodóncico (AU)

One of the effects of the neuromuscular deprogramming treatment is the mandibular clockwise rotation, making the light premature occlusal contact more evident and increasing the patient vertical dimension. In Class II patients with vertical component is difficult to treat them due to profile worsening as an effect of the clockwise rotation creating in some patient's anterior open bite, this has to be corrected later in treatment with orthodontic intrusion, surgery or prosthodontic treatment, increasing the total time of treatment with the vertical control necessity. This case report is a 45 years old patient, dolichofacial, with anterior open bite tendency, dual bite, decreased overjet and overbite, her chief complaint was temporomandibular joint dysfunction which dont allow her to do her daily duties, the treatment for her was neuromuscular deprogramming splint for the temporomandibular joint pain, and vertical control with temporary anchorage devices (miniscrews) before the orthodontic treatment (AU)

Ameloplastia positiva en relación céntrica como método auxiliar durante la finalización en el tratamiento de ortodoncia en un paciente bruxista / Positive ameloplasty in centric relationship as an auxiliary method during finalization in the orthodontic treatment in a bruxist patient

A continuación se presenta un caso de un paciente de 12 años de edad, con antecedente de bruxismo, con biotipo mesofacial, tercio inferior dolicofacial, hipertonicidad muscular en maseteros, cierre labial forzado con incompetencia labial de 4 milímetros con dolor en sinoviales anteriores inferiores. Los objetivos de tratamiento consistieron en lograr relajación muscular y promover un posicionamiento condilar ortopédicamente funcional y estable, realizar control vertical para disminuir gap interlabial, alinear líneas medias, mantener clase I molar bilateral, clase I canina bilateral y clase I incisiva, crear overjet y overbite adecuados, con recuperación estética y función del segmento anterior. Debido a eventos adversos durante la etapa de cierre de espacios, la clase molar y canina I no se logró, pero se aseguró mediante ameloplastias positivas la función y estética adecuadas para tener un tratamiento de ortodoncia estable a largo plazo (AU)

The following is a case of a 12-year-old patient, with a history of bruxism, with a mesofacial biotype, lower third of the facial area, muscular hypertonicity in the masseters, a forced labial closure with a 4-millimeter labial incompetence with pain in inferior anterior synoviums. Treatment objectives consisted of achieving muscle relaxation and promoting orthopedically functional and stable condylar positioning, perform vertical control to decrease interlabial gap, align midlines, maintain bilateral molar class I, bilateral canine class I and incisive class I, create adequate overjet and overbite, with aesthetic recovery and function of the anterior segment. Due to adverse events during the closing phase of spaces, the molar and canine I class was not achieved, but positive function and aesthetics were ensured by positive ameloplasties in order to have a long-term stable orthodontic treatment (AU)

Desprogramación neuromuscular en paciente con maloclusión esquelética clase II previo a tratamiento ortodóncico-quirúrgico / Neuromuscular deprogramming in malocclusion class II patient before an orthodontic-surgery treatment

Los pacientes con problemas esqueléticos clase II que han terminado su crecimiento, generalmente, se tratan con cirugía ortognática o extracciones de piezas dentarias. Un objetivo del tratamiento es obtener estabilidad a largo plazo. El presente caso clínico es de un paciente masculino de 15 años de edad con clase II esquelética sagital que se realizó desprogramación neuromuscular con un plano de acrílico, que permitió determinar la verdadera discrepancia intermaxilar y obtener que la articulación temporomandibular estuviera en una posición estable en relación céntrica del paciente previo a su tratamiento ortodóncico prequirúrgico (AU)

In patients with class II skeletal problems who have finished their growth; they are treated with orthognathic surgery or dental extractions usually. One treatment goal is to obtain long-term stability. The present case report is of a 15 years old male patient with skeletal sagittal class II who underwent neuromuscular deprogramming with an acrylic plane, which allowed to determine the true skeletal discrepancy and achieve a stable position of the temporomandibular joint in centric relation before the orthodontic treatment (AU)

Efecto comparativo de la Actividad Física Aeróbica y los Dispositivos ortopédicos estabilizadores en el dolor orofacial de origen musculoesqueletal en individuos con Trastornos temporomandibulares / Efeito comparativo da atividade física aeróbica e dispositivos ortopédicos estabilizadores na dor orofacial de origem musculoesquelética em indivíduos com disfunção temporomandibular / Comparative effect of aerobic physical activity and occlusal stabilization appliances on musculoskeletal orofacial pain in individuals with temporomandibular disorders

Resumen: El presente estudio evaluó la eficacia comparativa entre la actividad física aeróbica (AFA) y los dispositivos ortopédicos estabilizadores(DOE) en el manejo del dolor orofacial de origen músculo esqueletal en individuos con trastornos temporomandibulares (TTM). Participaron voluntarios dentados bimaxilar con dolor de origen músculo esqueletal con edades comprendidas entre 18 y 40 años. Para la evaluación de la variable dolor el instrumento de medición fue la escala verbal análoga. Cada uno de los grupos de tratamientos estuvo compuesto por siete individuos, los cuales fueron evaluados durante ocho (AFA) y seis (DOE) semanas respectivamente. La AFA se caracterizó por un descenso semanal significativo de 0.155 puntos en la medición del dolor. En tanto con DOE la tendencia fue aún más pronunciada que en el tratamiento con AFA, siendo esta diferencia significativa. El presente estudio demostró que, tanto la intervención con DOE como con AFA contribuyeron a la disminución del dolor orofacial de origen músculo esqueletal en voluntarios con TTM.

Resumo: O presente estudo avaliou a eficácia da atividade física aeróbica (AFA) no tratamento da dor orofacial de origem muscular esquelética em indivíduos com disfunção temporomandibular em comparação ao tratamento com dispositivo ortopédico estabilizador (DOE). Participaram voluntários com dor muscular esquelética com idade entre 18 e 40 anos e dentes bimaxilares. Para a avaliação da variável dor, o instrumento de medida foi a escala verbal analógica. Cada um dos grupos de tratamento foi composto por sete indivíduos, avaliados por oito (AFA) e seis (DOE) semanas, respectivamente. AFA foi caracterizada por uma diminuição semanal significativa de 0,155 pontos na medição da dor. Quanto ao DOE, a tendência foi ainda mais acentuada do que no tratamento com AFA, sendo essa diferença significativa. O presente estudo demonstrou que a intervenção do DOE e do AFA contribuiu para a redução da dor musculoesquelética orofacial em voluntários com TTM.

Abstract This study evaluated the efficacy of aerobic physical activity (APA) in managing musculoskeletal orofacial pain in individuals with temporomandibular disorders (TMD) compared to treatment with an occlusal stabilization appliance (OSA). Volunteers with musculoskeletal pain aged between 18 and 40 and with bimaxillary teeth involved. The analog verbal scale was used to evaluate the pain variable. Each treatment group included seven individuals evaluated for eight (APA) and six (OSA) weeks, respectively. APA showed a significant weekly decrease of 0.155 points in pain measurement. As for the OSA, the trend was even stronger than in the APA treatment-the difference was substantial. This study demonstrated that both the OSA and APA contributed to reducing musculoskeletal orofacial pain in volunteers suffering from TMD.

Method and accuracy of determining the jaw position of repositioning splint with the aid of digital technique / 北京大学学报(医学版)

OBJECTIVE@#To establish the workflow of determining the jaw position of repositioning splint with the aid of digital technique, and to evaluate the accuracy of this workflow and compare the accuracy of raising different vertical dimensions in vitro.@*METHODS@#A volunteer was recruited. The data of full-arch scans, cone beam computed tomography (CBCT) image and ultrasonic jaw motion tracking of the volunteer were acquired. The full-arch scans were merged with the CBCT image, which were then matched to the jaw motion tracking reference system. The jaw position of repositioning splint was determined when the anterior teeth opening was 3 mm and the condyle was in centric relation of the fossa in the sagittal plane. A digital repositioning splint was designed in the software based on virtual articulator and fabricated with additive manufacturing technique. After the splint was tried in, another CBCT image was taken and a qualitative analysis was conducted to compare the position of condyle between these two CBCT images. In the in vitro study, standard dental plaster casts with resin ball markers attached to the base were mounted onto a fully adjustable articulator in the intercuspal position. The dental casts were scanned by an extraoral scanner to establish digital models. The ultrasonic jaw motion tracking device was used to obtain simulated jaw movements on the articulator, which was repeated for three times. The digital models and data of jaw movements were merged in one coordination with the aid of bite forks. The jaw position of repositioning splint was determined by adjusting data of jaw movements, each of which was used to determine three vertical jaw positions 4 mm, 5 mm, and 6 mm with the horizontal jaw position of protrusion 2 mm. The virtual articulators with differently adjusted jaw movements were applied in designing repositioning splints, and the final repositioning splints and virtual jaw relationships were exported in STL format. Then the repositioning splints were fabricated with additive manufacturing technique and tried in plaster casts on the mechanical articulator, which were scanned and the jaw relationships on the mechanical articulator were exported later. The virtual jaw relationships and scanned jaw relationships were registered according to lower models and displacement of upper models was calculated. Ball markers were fit to acquire the coordinates of centers and absolute difference values of centers along three coordinating axes X, Y, and Z were calculated. One-way analysis of variance was conducted using SPSS 18.0 software to compare deviations of the three different vertical jaw relationships in two-side test and the significance level was 0.05.@*RESULTS@#With the aid of multi-source data fusion and individualized jaw motion, the clinical workflow of determining jaw position of repositioning splint was preliminarily established. The designed jaw position was realized on the right and the condyle was more inferior than the designed position on the left. Both displacement of the upper models and absolute difference values of centers showed no significant differences (P>0.05) in different vertical jaw dimensions. The displacement of the upper models was (0.25±0.04) mm. The absolute difference values of centers along the three coordinating axes X, Y, and Z were respectively (0.08±0.01) mm, (0.30±0.02) mm, and (0.21±0.04) mm.@*CONCLUSION@#A novel method of determining the jaw position of repositioning splint with the aid of digital technique is established. It is proved to be feasible by try-in after multi-data fusion, computer-aided design and computer-aided manufacturing. As is shown in vitro, it is accurate to apply this method in adjusting jaw position. Further clinical trial will be designed to evaluate its clinical effect.

Evaluation of pain intensity of the masticatory muscles after occlusal appliance and combined therapy: a 6-months follow-up pilot study

Masticatory muscle pain (MMP) is a common type of orofacial pain.Occlusal appliance (OA) is contemplated as a first-line conservative approach for chronic MMP, however, integrated biopsychosocial approaches such as counseling and self-care therapies (CSG) are also considered essential. Aim: This pilot study aimed to compare the use of a combined therapy (GSG + OA) and solely OA treatment on pain intensity related to chronic MMP over a 6-month follow-up. Methods:For this, 20 patients diagnosed with chronic MMP using the Diagnostic criteria for temporomandibular disorders (DC/TMD) were divided into 2 groups (n=10) and treated with OA or combined therapy (CoT; OA + CSG). Electromyographic muscle activity (EMG), visual analogue scale (VAS) and pressure pain threshold (PPT) were recorded at baseline, 1, 3 and 6 months after treatment. Data was collected and statistical analysis were applied at a significance level of 5%. Results:Results showed no significant differences at baseline among groups for any assessment. VAS showed that both treatments decreased subjective pain in volunteers over time, but no significant differences among both groups were observed at any evaluation time. For electromyography, CoT and OA presented no significant differences throughout the experiment neither on relaxed muscle position or maximum volunteer contraction. Finally, a significantly higher PPT for CoT was found for all muscles at the last assessment point (p<0.05). Conclusion: These findings suggest that both treatments are effective for the reduction of pain perception (VAS) in patients with chronic MMP. However, the addition of CSG to an OA therapy may be more beneficial for the improvement of tenderness on the same patients, at least in a long-term basis (> 3 months). Notwithstanding, a larger study should be performed to substantiate these findings